Whether it is a mobile phone or tablet, not the root, then, really no law, in fact, this board is not a lot of built-in program, but one page, rom are considered clean, and this is quite satisfactory, only accurate software there is Jingdong Mall (do not) and micro-channel (mobile phone), ireader (read more like anyview), if you do not root, these are not removed, the same features of the software I have always been just installed a Ningquewulan.

Beginning with Zhuo master to root, suggesting no model, it failed, and later with Baidu a key root, although the computer prompts successful, in fact, is a failure, the message "P88 ROOT various tools result of an attempt" to test a lot of a ROOT software, most fail.

Finally use TPSparkyRoot, it cleaner compared to other tools, in theory, support all board Rockchip 3066 Android 4.1 system, although after Root saw the re Manager and SuperSU, but the strange thing is still not root, forced to restore the factory settings like, the other in the process of root will not restart automatically, manually every time!

ready

1. The data line is connected, pea pods driver installed.

2. Download and unzip TPSparkyRoot (Baidu network disk).

3. Click Settings - Security - of unknown origin (tick).

4. Click Settings - Developer options -USB debugging (tick).

process

1. Run TPSparkyRoot.bat

2. The tablet will restart for the first time, pay attention to the screen (if not restart manually press the power button).

3. When the restart plate (i.e., connected to the computer), press any key to continue.

4. The plates will be restarted for a second, while observing the screen (if not restarted manually press the power button).

5. Wait for the restart plate (i.e., connected to the computer), press any key to continue.

6.cmd displays a line of information id = 0 or root

7. If id = 0 or root Press any key to continue, or press Ctrl + C Reply Y to cancel the attempt.

8. The tablet will restart for the third time, pay attention to the screen (if not restart manually press the power button).

9. Press any key to continue, the program will automatically shut down. Root success!

10. Wait flat restart, restart the application to see if there is SuperSu and RE Manager. If the root is successful, then we did the tutorial again.