My home gen8 NAS
Life is not just about living in front of you, but also about tossing and dreaming!
With the penetration of smart phones, the desalination of home PCs, the upgrading of access bandwidth, the rapid upgrading of storage capacity, the importance of data, home NAS has a certain market demand. Because I myself pay more attention to computer equipment, and I am also very keen on the Internet. With the recommendation of partners, on June 20, 2015, we bought a HP microserver gen8. G2020t power supply of u, 150W and 4-bay on JD. It has been three and a half years since then. Let me talk about the road of trouble.
1. After arrival, insert a new 1t WD blue disk and a new memory module. To be honest, the power on and lighting up are shocked by the sound of the machine fan. The power on time is very long, and it needs to be started twice for the first time. In addition, I experienced the next ILO port, which is also authorized by a treasure and managed directly and remotely.
2. Install the system, I chose win2008 server R2, authorized by a genuine Bao, to install the system remotely. Now I don't remember the specific steps clearly. There is no time to toss again. Now the system is working properly.
3. As a download machine, direct system through thunderbolt, go to movie paradise and download many movies, the speed is loud, in addition to the data backup. The content on the website is also available for download.
4. Install various remote clients, mstsc on win computer, ES browser on mobile phone, and several remote software. The customer experience is not very good, and then to the later team view. It's purely for interest. The actual experience is poor.
5. The experience of sharing folders by machine and playing by mobile phone is not very good. I have been sleeping for nearly 3 years, during which I started the machine successively, forgot the management password twice, and re used the magnifying glass loophole for recovery.
6. The road of transformation begins. I was shocked by the speed of local area network because of the change and upgrade of broadband at home and the replacement of Gigabit router and category VI network cable. Video playback, put in a complete zero carton, super must be clear and smooth. And want to use this machine directly to watch some video tutorials and so on.
7. At the end of 201810, purchase and update the HP 22 inch 1080p supporting display, the original default VGA interface display, the display effect resolution is low, and the display is stuck, which is unacceptable.
8. Taobao purchased hd7470 independent graphics card. After installation, the screen resolution is still less than 1080p. During the installation, it has a lot of twists and turns. After installing various drivers, it is doubted whether the video card itself does not support 1080 (and the screen will flicker). Finally, it was tested that it is normal to get DP to VGA (only the display cannot be activated after the screen is dormant after standby). It was found that the problem is the DVI to VGA adapter. Later With the new DVI VGA cable, the effect is very good!
9. Equipped with Bluetooth adapter: I wanted to get rid of the entanglement of the cable, equipped with Bluetooth speaker, but it was never done, and it was not convenient to pair. I wanted to equip with Bluetooth multi-mode keyboard (one disk and multi-purpose) and so on. I originally used a 2.4G wireless keyboard. Later, I think it's better to use it like this.
10. Three interface installation of USB sound card: it is properly installed and has good effect. It can connect speaker and headset at the same time
11. The way of Virtualization: install Hyper-V, the components of win2008 system, no need to install VM virtual machine platform and so on.
12. Link aggregation: it has been known for a long time that gen8 has dual network ports, and it is also accessible by the access network cable at the same time, but the IP will become two, which is a bit troublesome when sharing! Since the routes are all Gigabit, link aggregation is the only way. I downloaded the components of HP NCU and completed the aggregation. I used TLB mode to connect. The downlink bandwidth is 2G and the uplink is 1g. When the recommended mode is adopted in the networking of team network card, it will be found that the access speed of the master computer is very slow, which may be caused by the coordination of the working mode of the two network cards.
Update the network card driver during aggregation
13. On the Hyper-V virtual machine, the original downloaded dms6.15 failed to boot for many times, but the returned dms5.2 still failed. After unremitting efforts, it was solved: the BIOS boot mode used ide to set the virtual CD-ROM ISO file (in fact, due to the confusion of the UI setting mode, I thought it was successful), during which I found the problem of DHCP addressing, and finally solved it.
I directly use the network card team after link aggregation, that is to say, based on the driver level of direct, effect leverage. (the default is the old network connection mode, NG)
14. Binding of IP and MAC address: in order to prevent IP address change after restart and IP conflict between set IP and other assigned machine IP, IP and MAC address are bound in router. There is no need to set it on this machine.
15. Photo \ video and other components are installed on the black cloud. The reason is that there is no disk. Create a new virtual disk to mount, check the partition, and finish.
16. The sync app is installed on the mobile phone. Some shared pictures can't be loaded. It's estimated that it's a permission problem. It's to be tested. Over!
Copyright Protection: ShuDudu from the original article, reproduced Please keep the link: https://www.shududu.com/netweb/My-home-gen8-NAS.htm