My snail interstellar today July to buy, but at that time still relatively unfamiliar to Synology, it seems a little "awe" sense, did not dare to toss. Broadcast storm last month bought two cool cloud when it embarked on the road of the toss.

I had more black Synology online installation tutorial too much, because too much, so for newcomers, also feel these tutorials too messy too messy. I toss Synology also by online tutorials to, but for so many tutorials and chaos, sometimes knowing where to start. Handle their own sort of over the chaos of the tutorial, the method is simple to install Synology recorded.

For broadcast storm clouds and cool interstellar snails, installation of Synology Synology black version is different because they have different hardware configurations. According to the online experience of everyone, broadcast storm clouds cool for two DS3617XS version 6.17 installed, and the snail interstellar suitable for installation DS918 + 6.21 version. The other version is not very stable, and some can not be shut down or switch off too long, and some boot time ten minutes. So we still honestly use of low version of it! Why is the use of low version, because stable!

Synology system and win our normal system use different, win system boot and system are installed on the same hard disk, if a machine is hard, win just need to install the system on the primary hard drive. Hui group and the system is separate from the guide, the guide may be mounted in the U, may be mounted on a small hard drive SSD, and the system will be installed on each hard disk upswing. It should be noted that, if the guide is installed on the SSD hard drive, the hard drive that can only make a boot disk, you can not save the data in the above! At first I was after installing the boot on SSD drives also can put the rest of the space to store the data, the results of this idea was not realized.

Synology's online system can be divided into combo and non-combo, combo system and guide the same image, the combo is not the boot and system is separate from the past.

Here I offer a combo and installation tools, non-combo system, https: //pan.zhang.bo/, go download it. But not recommended combo version, since this version is very error-prone and unstable.

Followed by step Come here that the method of mounting a non-combo

1. Download

From https://pan.zhang.bo/ link to download a good tool to guide the system, in fact, tools download XPEnology versatile toolbox V1.2 on it, he integrated the tools needed.

2, view the disc VID and PID U. SSD is mounted in the boot may be omitted.

Open the "chipgenius" through the toolbox, this tool is to read the VID and PID U disc.

Note the difference between different letter found U disk, write down the VID and PID U disk

3, the modified guide VID and PID

By OSFMount software, load the boot image file, pay attention to select the "partition 15MB" of that option, in addition to "read-only drive" option is also removed.

Note that the image of the article directory can not have Chinese, otherwise it will error.

After the image file is loaded, the computer will come out one more letter, after grub.cfg modify the VID and PID 22,23 rows grub folder open with notepad ++ 4 position, be careful not to put in front of 0x deleted.

Here if you have black Synology also whiten the SN code modifications, and then modify the MAC address of the network card, which can be washed up.

This is my first post-modification image installation, you can also do this step first, and so on Synology installed after modification

4, the installation guide

I wrote under win10 with tools to guide the U disk mirror fails, do not know why.

Using PE system boot disk with the broadcast storm clouds start to cool the PE, using DiskImage-V1.6-WinAll tool to guide the U written to disk.

Do not forget to take pictures. . . what

5, the installation system

When the boot successfully written, restart the broadcast storm cloud cool, use Synology Assistant, Synology search on another computer in the same local area network

Here we must select the "Manual Installation", you choose to download a good system to install.

Skip this place, because there is no white Synology's SN code, so this step over it.

Over ten minutes, Synology system will be installed.

6, adding a hard disk

It involves a lot of knowledge, not to repeat them, you can Baidu. Because the store is not too important thing on my NAS, so do not plan to use RAID.

raid group to choose basic right,

Select the file system btrfs.

And now basically it is finished.

If at first you did not modify the VID, PID or want to whiten modify SN code, you can start with a lower PE U disk system, the use of DiskGenius can be modified.

Boy, it is not easy to write tutorials, spent an hour!